Home › Aluminum and Steel Fence Installation
Our aluminum and steel fence installation services in Coeur d'Alene, ID deliver elegant security for your home. We install ornamental metal fences that mimic wrought iron without the intensive upkeep. These fences are ideal for front yards, pools, and property lines where visibility and style matter. Enjoy a strong, rust resistant fence that boosts curb appeal and safety.
Legendary Fence Company Coeur d'Alene provides professional aluminum fence throughout Coeur d'Alene, ID, and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call 208-987-1344 or request your free quote.
Aluminum and Steel Fences Built for Coeur d'Alene Properties
Legendary Fence Company Coeur d'Alene installs aluminum and steel fences that are designed for North Idaho weather, sloped terrain, and local HOAs. We focus on fences that look clean and stay straight even after years of snow load, freeze-thaw cycles, and irrigation.
When you call us about an aluminum fence, we start by asking how you plan to use it. That might be securing a backyard, enclosing a pool, keeping pets in, or lining a driveway. Your purpose affects ideal height, picket spacing, gate locations, and lock types.
Next, we look at your property layout in person. Coeur d'Alene lots often have elevation changes, rock outcrops, and a mix of lawn and gravel. We check for sprinkler lines, shallow utilities, and drainage paths so your fence does not block water flow or create ice patches in winter.
From there, we recommend aluminum or steel based on your priorities. Aluminum is lighter and corrosion resistant, so it is usually better near lakes, irrigation, and heavy snowmelt. Steel is stronger for security or commercial use. We explain the trade-offs clearly before you decide.
How Our Aluminum and Steel Fence Installation Process Works
We follow a consistent installation process so your fence stays solid and aligned for the long term.
1. Site measuring and layout: A crew member walks the entire fence line with a wheel or laser measure. We mark corner and gate posts first, then intermediate posts, adjusting for trees, rock, and property lines. In older Coeur d'Alene neighborhoods where fences have shifted over time, we often confirm property boundaries against the recorded plat or survey stakes if available.
2. Utility locating and permits: We call 811 before any digging. In Coeur d'Alene and surrounding Kootenai County areas, shallow gas, communication, and irrigation lines are common. If local rules or your HOA require a permit or design approval for aluminum fence installation, we help gather drawings and specs.
3. Post hole excavation: Most aluminum and steel fences here use 2 to 3 foot deep post holes, deeper where frost heave is a concern or on slopes. We use augers suited to rocky North Idaho soil. If we hit boulders, we either core drill or adjust post spacing slightly while keeping the line visually straight.
4. Setting posts in concrete: We use concrete mixes and hole sizes that account for frost depth and wind exposure. On steeper ground, we often bell out the bottom of the hole to resist uplift from freeze-thaw. We check each post with a level and string line so panels install tight and even.
5. Panel and rail installation: For aluminum fences, we attach pre-fabricated panels or assemble rail and pickets on site, depending on the style. Steel systems are usually rail-and-post with welded or bracketed connections. On hillsides, we either rack the panels to follow grade or step sections so the top rail looks consistent.
6. Gates and hardware: We reinforce gate posts with deeper footings and extra concrete. In snowy parts of Coeur d'Alene, we often hang gates slightly higher to clear snow and install adjustable hinges so sag can be corrected over time.
7. Final inspection and walkthrough: We walk the fence line with you, confirm gate operation, and point out any areas that may need seasonal checkups, such as corners that take snow slide from a roof.
Real Choices: Styles, Heights, and Coatings That Actually Matter Here
Aluminum and steel fences all look similar in photos, but the details matter in Coeur d'Alene conditions.
Aluminum fence options:
- Heights: Common residential heights are 4, 5, and 6 feet. For pool code compliance, we typically recommend 5 feet or higher with specific picket spacing and latch heights.
- Picket spacing: Tighter spacing is better for small dogs and kids, but can slightly increase material cost. We show you samples so you can see exactly how wide the gaps will be.
- Top styles: Flat top for a clean, modern look, or spear tops and decorative finials if you want a more traditional or security focused style.
- Colors and coatings: Most customers in Coeur d'Alene choose black powder-coated aluminum because it blends with pine trees and shadows. Bronze or dark green are options for homeowners who want the fence to disappear against landscaping.
Steel fence options:
- Posts and rails: Heavier wall thickness for security or larger gates, lighter options for simple property lines.
- Ornamental styles: Similar to aluminum, but with more weight and rigidity. Good for front yards where you want a substantial look.
- Coatings: Galvanized and powder-coated steel helps resist rust, which is important in areas with regular snow, road splash, or lake-effect moisture.
We also talk frankly with you about visibility. Many Coeur d'Alene homeowners choose aluminum fence along lake or mountain view sides because it secures the yard without blocking the scenery the way a privacy fence would.
What Drives the Cost of an Aluminum Fence in Coeur d'Alene
We keep pricing straightforward by explaining what really affects cost in this area.
1. Material type and grade: Aluminum usually costs less to maintain over time than steel because it does not rust, but heavier ornamental styles cost more than basic flat-top designs. For steel, wall thickness and decorative details add to the budget.
2. Fence length and height: Total linear footage, number of corners, and height all change material and labor quantities. Long straight runs are more efficient to install than short sections with many angles.
3. Terrain and soil conditions: Rocky soil, steep slopes, and heavily treed lots in Coeur d'Alene can increase labor because posts are harder to set and lines are more complex to lay out. If we need to hand-dig sections due to tight access, that is factored into the estimate.
4. Gates, hardware, and access control: Standard walk gates are simple. Double drive gates, wider openings for RVs or boats, or integrated keypads and closers add cost. We size posts and hinges correctly for the gate weight so you do not end up with sagging.
5. Permits and HOA requirements: If your neighborhood in Coeur d'Alene has specific aluminum fence rules on height, color, or setback, we build the design to meet them the first time. This prevents costly rework later.
During your estimate, Legendary Fence Company Coeur d'Alene breaks out materials and labor so you can see where your money is going. We also point out any areas where a slight design change, such as moving a gate or shortening a run, would save cost without sacrificing function.
Common Aluminum and Steel Fence Issues and How We Prevent Them
Our crews see the same avoidable problems over and over on older fences around Coeur d'Alene. We build to avoid those from day one.
Post movement from frost: Shallow posts and poor concrete are the main reasons fences lean after a few winters. We use proper depth and bell-shaped footings where needed, then fully encase posts in concrete instead of just setting them in loose soil.
Rust on steel fences: Cheap or poorly coated steel rusts quickly in areas with snow piles and road slush. When we install steel fences, we use galvanized or powder-coated components and pay attention to cut edges and hardware. We also explain simple maintenance steps, such as rinsing off heavily salted areas in early spring.
Misaligned gates: Many gates in our area drag on driveways after a couple of seasons. We brace gate posts properly, set them in larger concrete footings, and use adjustable hinges so small movements can be corrected without replacing the gate.
Poor drainage at the fence line: If a fence blocks water where yards slope, you can end up with ice sheets in winter and soggy spots in spring. We leave proper clearances at the bottom of the fence where needed and avoid creating dams across drainage paths.
Legendary Fence Company Coeur d'Alene also offers repairs on existing aluminum and steel fences. We can reset leaning posts, replace damaged panels, and upgrade gate hardware so you get a few more solid years out of your current fence if a full replacement is not in the budget yet.
Why Choose Legendary Fence Company Coeur d'Alene for Aluminum Fence Work
Aluminum and steel fence installation is a long term investment, so you want a contractor who understands both the materials and the region.
Local experience: We work year round in Coeur d'Alene, Post Falls, Hayden, and the surrounding areas, so we know where frost pockets, rocky ground, and HOA rules tend to cause problems. We factor those realities into your design and estimate.
Clear communication: Before we start, you know where the fence will run, how deep posts will be set, where gates will go, and how long the job will take. We flag lines and walk them with you so there are no surprises.
Respect for your property and neighbors: Our crews plan material staging and parking so driveways, shared access roads, and lake paths stay usable. On tight city lots, we coordinate with neighbors when the fence runs near or along a shared line.
Straightforward warranties and follow up: We stand behind both the manufacturer warranty on aluminum fence materials and our labor. If an installation issue shows up within the warranty period, we come back and fix it without excuses.
If you are considering an aluminum fence or a steel ornamental fence in Coeur d'Alene, we encourage you to schedule an on site visit. Legendary Fence Company Coeur d'Alene will give you a specific plan, a clear price, and a fence that matches how you actually use your property, not just how it looks in a catalog.
